Commercial

Carlisle Service Company was hired by FITTS for the purpose of carrying out Synovus Bank’s new Rebranding Campaign. The Scope of Work Consisted of: Installation of new stationary in-ground signage at various locations; installation of new on-brand graphics; remove and replace ATM canopy signage.

Carlisle Service Company was hired by Circle K for the purpose of rebranding their new Polar Pop fountain Drink stations. The Scope of Work Consisted of: Transportation of new Polar Pop fountain station materials to various sites; Demo & removal of old equipment; Installation of new Polar Pop Equipment & various graphics; We working water/drain lines & electrical hookups for new equipment.

Carlisle Service Company was mobilized to sanitize an 8-story tower complex consisting of 170,000 SF of Office Space at the onset of the COVID-19 Pandemic. Cleaning Technicians were mobilized in an after-hours capacity and utilized atomized fogging machines and mechanical methods to properly sanitize the building envelope and contents of the effective areas. All work was conducted in an effort to not disturb the customers and employees in their day-to-day operations.

Carlisle Service Company was hired by Pratt and Whitney for the emergency remediation of mold found in two locations at their MCL Lab location in Columbus, GA. The Scope of Work Included: Construct containment chamber with 2x4 walls, ledger, & rafters 8' off each interior/damaged wall & 6' in hall; Install Pratt approved plastic over entire containment area & seal with double sided tape; Install 3 air scrubbers in main containment, 1 in hall containment, 1 in Tensile for duration of project; Demo affected drywall 4'-8' high as needed in all areas, double bag, & dispose off site; Clean exposed stud walls & drywall with anti-microbial (Mediclean); Clean exposed stud walls, drywall, & containment area with HEPA Vacuums; Seal exposed stud walls & drywall with primer 1 coat’; Obtain third party analytical air sampling & final clearance letter for each containment area post remediation; Break down and dispose of all containment once clearance letter is obtained; Patch back drywall & insulation as needed.

In the early wake of the COVID-19 epidemic, Carlisle Service Company was hired by Pratt and Whitney in Columbus, GA to man a 24-hour staff of technicians to maintain the sanitization of all working area in the Pratt & Whitney Plant. Cleaning Technicians used industrial disinfectants to continuously clean all manned areas of the production floor.

Carlisle Service Company was hired by Exide Batteries to improve the COS Battery Assembly Line # 4 area by cleaning the overhead mechanical lines & duct lines. The current condition of the overhead area was covered with lead-dust from standard manufacturing debris and traffic. Carlisle Service Company mobilized articulating man lifts to vacuum and whip down all components in order to improve the cleanliness view and to prevent the built up of debris from falling on employees, contractors, and visitors to the plant. This project also included the handling of potentially hazardous manufacturing materials such as Lead-Oxide and Sulfuric Acids in which, Carlisle Service Company was responsible for monitoring the wellbeing of their employee’s overall health. Through regular blood testing, the lead exposure of each employee was watched for the duration of the project & the extent of being on-site.

Carlisle Service Company was hired by Synovus bank for the instillation of their new ATM Kiosk at the Historic Krog Street Market in Downtown Atlanta. Due to the Historic nature of the building, it’s location in a busy metropolitan area, and the ATM being installed into an exterior wall, stamped architectural drawings were required for the permitting of the job. The Scope of Work consisted of: Outsourcing Architectural design to provide proper drawings for permitting to local municipalities; Demo and removal of selective wall sections; Running appropriate electrical hookups for new ATM Kiosk; Installing new FITTS designed Wall Mounted Kiosk ATM; Patch back of selective brick on exterior wall, installation of flashing around the ATM face to provide flush transition to the wall.

Carlisle Service Company was hired by Synovus bank for the instillation of their new ATM Kiosk in Ft. Benning, GA. The Scope of Work consisted of: Demo and removal of existing ATM; Pouring new concrete pad to location; Running appropriate electrical hookups for new ATM Kiosk; Installing new FITTS designed Single Pole Canopy Kiosk ATM.

Carlisle Service Company was hired by Synovus bank for the instillation of their new ATM Kiosk in Chattanooga, Tennessee. The Scope of Work consisted of: Drafting In-House Shop Drawings for permitting to local municipalities; Demo and removal of selective concrete/asphalt; Pouring new concrete pad to location; Pouring new curb and gutter; Running appropriate electrical hookups for new ATM Kiosk; Installing new FITTS designed Single Pole Canopy Kiosk ATM; re-striping existing parking lot section to create the proper ingress/egress of traffic for the ATM’s use.

Carlisle Service Company was hired by Synovus bank for the instillation of their new Oneida ATM. For this project, Carlisle Service Company designed the round-about site layout for this ATM. The Scope of Work consisted of: In-House Site Layout Design; Submitting for Permitting and Approval from local municipalities; Site-Work & Grading; Pouring on new Concrete/Asphalt driveway as well as concrete curb; Landscaping; Pouring new concrete pad to location; Running appropriate electrical hookups for new ATM Kiosk; Installing new FITTS designed Single Pole Canopy Kiosk ATM.

Carlisle Service Company was hired by Synovus bank for the installation of their new ATM Kiosk on Bay Ave in Historic Downtown Columbus, GA. The Scope of Work consisted of: Demo and removal of existing ATM; Pouring new concrete pad to location; Running appropriate electrical hookups for new ATM Kiosk; Installing new FITTS designed Single Pole Canopy Kiosk ATM.